More great feedback. Thanks all. More points to address.. questions to answer:

• Janet suggested a different design layout for the Golf Shirt. I thought about that myself. The Golf shirt is one of the test products that I have in hand. The image on the back does look good.. but the shirt would also look good with just the front pocket design. That having been said.. we CAN setup unique configurations of the products. So, if you would like, for example, the Golf Shirt without the image on the back, I can set that up in a separate shop just for you. All you have to do is ask. Once the product is shipped, we can eliminate that special product from the other shop. So please don't feel limited by the product / design layout as shown in the current shop. We can have one-off design layout products.
• I realize that there is a lot of interest in black shirts and other darker colors. We've addressed the limitations in the current offering. Until CafePress improves their offering, we won't be carrying the black shirt.
• As I mentioned, I received a few test products before we opened the shop to make sure the quality was good. But, we couldn't order every product available due to the cost involved. As such, there may be a surprise quality problem with some of the products. CafePress does have a limited-time money back guarantee. So if you don't like what you've recieved, please take advantage of that offer. Also please let me know so I understand the issue. I may be able to adjust the design/product to overcome the quality issue.
• The outline image of the SS that has been mentioned was designed by an unknown person long ago. As such we don't have the copyright and I'm not comfortable adding the image to any of our products.
• There are no iron-on style products in the shop. All of the images are direct-print style. That means for a fabric based product, the ink is set directly into the fabric. So the design does not have that typical iron on feel. In fact, after a wash or two, I don't think you'd be able to tell where the design is by feel alone.
• As for the 1:18 diecast from Welly, my contact from there stopped communicating. So I haven't had any updates on their product for over a year. But that's a topic for a different thread. I'd rather not muddy up this thread with that discussion... so please refrain.
• As for the license plate frame, CafePress does offer that product. I didn't add it because the current design obviously didn't support the frame. I'll look into the design requirements for the license plate frame to see what kind of options we have.

Thanks again for the comments and suggestions!