MonteCarloSS.com
MonteCarloSS.com
Previous Thread
Next Thread
Print Thread
Page 1 of 2 1 2
#838831 - 11/26/10 12:59 PM GM Clips and Fasteners  
Joined: Dec 2005
Posts: 2,740
84LS1T56SS Offline
Member
84LS1T56SS  Offline
Member

Joined: Dec 2005
Posts: 2,740
Central, Arkansas
Here is a place to get all of your clips and fasteners for your car. This really should be put into the stickies.

http://www.clipsandfasteners.com/General...w=45&page=1



85 MCSS, 02 5.3/4L60E stock daily driver,84 MCSS, Another stock 5.3/60E.
#838836 - 11/26/10 01:42 PM Re: GM Clips and Fasteners [Re: 84LS1T56SS]  
Joined: Dec 2007
Posts: 3,960
Monte_ExpreSS Offline
10+ Year
Monte_ExpreSS  Offline
10+ Year
Member

Joined: Dec 2007
Posts: 3,960
Oshawa, Ont. Canada
That just went in my favorites, thanks

#838843 - 11/26/10 03:33 PM Re: GM Clips and Fasteners [Re: Monte_ExpreSS]  
Joined: Apr 2007
Posts: 181
bkmonte87 Offline
Member
bkmonte87  Offline
Member

Joined: Apr 2007
Posts: 181
Baltimore, MD
Mine to, Thanks


87 BLACK/SADDLE ORG.OWNER 204K

[Linked Image]
#838847 - 11/26/10 04:08 PM Re: GM Clips and Fasteners [Re: bkmonte87]  
Joined: May 2007
Posts: 1,580
MattsMonte Offline
10+ Year
MattsMonte  Offline
10+ Year
Member

Joined: May 2007
Posts: 1,580
Johnston, Iowa
Ditto


[Linked Image]

1988 MCSS T-Tops. Frame off restoration, 330HP 350 crate engine, 700R4 transmission.
#838927 - 11/26/10 11:35 PM Re: GM Clips and Fasteners [Re: MattsMonte]  
Joined: Nov 2006
Posts: 3,816
406monte Offline
10+ Year
406monte  Offline
10+ Year
Member

Joined: Nov 2006
Posts: 3,816
Hubert, NC
Awesome site I added to my favs as well.


84 Monte Carlo SC 406 SBC
78 Monte Carlo 305 sbc SOLD
78 Monte Carlo Landua 350 sbc SOLD
81 Malibu Classic 350 sbc SOLD
84 Monte Carlo LS 350 sbc SOLD
84 Buick Regal 229 v6 SOLD

#839191 - 11/28/10 01:25 PM Re: GM Clips and Fasteners [Re: 406monte]  
Joined: Feb 2006
Posts: 1,302
FrankOC Offline
10+ Year
FrankOC  Offline
10+ Year
Member

Joined: Feb 2006
Posts: 1,302
Cape Cod, MA
wow, same here and I agree that this would be a great sticky.


85 - ZZ383, 6-speed, 8.5"
70 - Stock, 35k miles
#839212 - 11/28/10 05:34 PM Re: GM Clips and Fasteners [Re: FrankOC]  
Joined: May 2010
Posts: 332
PennsyMonteSSGuy Offline
Member
PennsyMonteSSGuy  Offline
Member

Joined: May 2010
Posts: 332
Doylestown, PA
Nice, thanks!


Sold my toy...
#839269 - 11/29/10 01:53 AM Re: GM Clips and Fasteners [Re: PennsyMonteSSGuy]  
Joined: Feb 2002
Posts: 5,325
Big3 Offline
10+ Year
Big3  Offline
10+ Year
Member

Joined: Feb 2002
Posts: 5,325
Lancaster, Ohio

Last edited by Bigthreefan; 11/29/10 01:59 AM.

87 MCSS Black w/Saddle
383 w/dart heads,Functional Goodmark hood.
700r-4, Gforce member,4.10s
1LE's w/Hotchkis uppers,2" drop & ZQ8's
#840804 - 12/06/10 11:24 PM Re: GM Clips and Fasteners [Re: Big3]  
Joined: Nov 2010
Posts: 22
chuckie Offline
Junior Member
chuckie  Offline
Junior Member

Joined: Nov 2010
Posts: 22
butler pa
thanks man i added to favorites also

#843875 - 12/25/10 12:36 PM Re: GM Clips and Fasteners [Re: chuckie]  
Joined: Oct 2009
Posts: 1,039
SKIDMARK Offline
Member
SKIDMARK  Offline
Member

Joined: Oct 2009
Posts: 1,039
New Bern NC
Does any company out there have a whole hardware kit for sale as a complete package let's say for example a kit for chassis restoration and then another one for interior or body mounts this would be somrthing I would be interested in.

#849424 - 01/24/11 10:21 PM Re: GM Clips and Fasteners [Re: SKIDMARK]  
Joined: Nov 2010
Posts: 15
IowaSS Offline
Junior Member
IowaSS  Offline
Junior Member

Joined: Nov 2010
Posts: 15
Davenport, IA
http://www.auveco.com/product/auto.html

Better than any of the sites listed.


I put the xxxx in IowaSS.
#849462 - 01/25/11 01:03 AM Re: GM Clips and Fasteners [Re: IowaSS]  
Joined: Feb 2006
Posts: 1,302
FrankOC Offline
10+ Year
FrankOC  Offline
10+ Year
Member

Joined: Feb 2006
Posts: 1,302
Cape Cod, MA
"better" is relative. I would prefer the first site in the list as I can buy direct from the site.


85 - ZZ383, 6-speed, 8.5"
70 - Stock, 35k miles
#849484 - 01/25/11 01:49 AM Re: GM Clips and Fasteners [Re: 84LS1T56SS]  
Joined: Jan 2011
Posts: 217
jwc55 Offline
Member
jwc55  Offline
Member

Joined: Jan 2011
Posts: 217
Wiarton Ontario
I' ve already got an order started, Thanks for the info


Jim
87 SS... White with T-tops
87 Aerocoupe... White with T-tops
#849556 - 01/25/11 02:16 PM Re: GM Clips and Fasteners [Re: FrankOC]  
Joined: Nov 2010
Posts: 15
IowaSS Offline
Junior Member
IowaSS  Offline
Junior Member

Joined: Nov 2010
Posts: 15
Davenport, IA
Originally Posted By: FrankOC
"better" is relative. I would prefer the first site in the list as I can buy direct from the site.


Better as in I have a hard catalog and the parts are made in the U.S. instead of some chinese junk.


I put the xxxx in IowaSS.
#857073 - 03/01/11 02:08 AM Re: GM Clips and Fasteners [Re: IowaSS]  
Joined: Dec 2003
Posts: 4,123
SS Ninja Offline
15+ Year
SS Ninja  Offline
15+ Year
Member

Joined: Dec 2003
Posts: 4,123
Stoughton, MA


1987 Monte Carlo SS: The toy
Click here for my build thread
1987 Monte Carlo LS: Daily Driver
Build thread for the LS
#858101 - 03/05/11 04:10 AM Re: GM Clips and Fasteners [Re: SS Ninja]  
Joined: Dec 2005
Posts: 2,740
84LS1T56SS Offline
Member
84LS1T56SS  Offline
Member

Joined: Dec 2005
Posts: 2,740
Central, Arkansas
The bottom one is what you want.



85 MCSS, 02 5.3/4L60E stock daily driver,84 MCSS, Another stock 5.3/60E.
#859420 - 03/10/11 10:25 PM Re: GM Clips and Fasteners [Re: 84LS1T56SS]  
Joined: Feb 2008
Posts: 114
Radar43 Offline
Member
Radar43  Offline
Member

Joined: Feb 2008
Posts: 114
Lebanon, tn
84LS1T56SS, is that the same one for the 16 pieces used on the front and rear bumper covers on a SS?

#859667 - 03/11/11 09:57 PM Re: GM Clips and Fasteners [Re: Radar43]  
Joined: Feb 2008
Posts: 114
Radar43 Offline
Member
Radar43  Offline
Member

Joined: Feb 2008
Posts: 114
Lebanon, tn
I was able to go out into the garage this afternoon and pull a fastener out of the front and rear bumper covers, from under the car and one from the top front bumper cover, under the hood. The 16 found under the car, 8 front and 8 rear, are different from the 8 found under the hood. So two different sizes.

#876723 - 05/31/11 03:31 PM Re: GM Clips and Fasteners [Re: Radar43]  
Joined: Apr 2011
Posts: 281
DiamondSnake Offline
Member
DiamondSnake  Offline
Member

Joined: Apr 2011
Posts: 281
Québec, QC
What's the best way to remove one of those push-type fasteners without breaking them?

#876726 - 05/31/11 03:56 PM Re: GM Clips and Fasteners [Re: DiamondSnake]  
Joined: Jan 2003
Posts: 7,188
Aeroaddict Offline
15+ Year
Aeroaddict  Offline
15+ Year
Member

Joined: Jan 2003
Posts: 7,188
Fairfield County ,CT
Originally Posted By: DiamondSnake
What's the best way to remove one of those push-type fasteners without breaking them?

pull out the center "pin". I usually use a pair of needle nose or small flat head screw driver


87 Monte SS Aerocoupe- Street / Strip

www.ctgbody.com

CT G-body Facebook
#876735 - 05/31/11 05:56 PM Re: GM Clips and Fasteners [Re: Aeroaddict]  
Joined: Apr 2011
Posts: 281
DiamondSnake Offline
Member
DiamondSnake  Offline
Member

Joined: Apr 2011
Posts: 281
Québec, QC
Thanks for the info laugh

#888826 - 08/07/11 04:05 PM Re: GM Clips and Fasteners [Re: DiamondSnake]  
Joined: May 2010
Posts: 678
joyride Offline
Member
joyride  Offline
Member

Joined: May 2010
Posts: 678
Tacoma, Wa
Love that I found this, bought a set of door rod clips or whatever, and used a few since the package came in the mail yesterday. They work great!


Brian

Had an 88 Monte SS in HS, sold that!
07' MC SS black, all stock (for now)
85' Monte SS project car. Flat Black, 305 w/ LT headers, drop spindles, CPP 2 inch A-body rear springs, 18" Boss 338s
http://www.youtube.com/watch?v=HeKFlFEG_Bk&feature=share&list=UUiPzUj6CEffDt2J4Rv0Iwfw
#890992 - 08/19/11 08:42 PM Re: GM Clips and Fasteners [Re: IowaSS]  
Joined: May 2006
Posts: 622
daveSS1987 Offline
Member
daveSS1987  Offline
Member

Joined: May 2006
Posts: 622
Enfield, CT
I hust placed an order from the first site and noticed that they are a authorized dealer for Auveco so they probably sell you the same parts in your hard catalog! Problem with that catalog is you can't buy directly from them they only sell to authorized distributors. Who are the guys that we must buy from!

Originally Posted By: IowaSS
Originally Posted By: FrankOC
"better" is relative. I would prefer the first site in the list as I can buy direct from the site.


Better as in I have a hard catalog and the parts are made in the U.S. instead of some chinese junk.


1987 Choo Choo Customs El Camino SS with Monte Carlo SS TH200R4, 3.73 posi rear,'87 SS wheels, Edelbrock TES with Flowmasters, S-10 Xtreme spindles & front brakes and custom SS/GN interior w/ power seats, mirrors, antenna, concert sound, etc .... The way GM should have made it in 1987! Coming soon 383 w/ roller cam!
#891985 - 08/26/11 04:42 PM Re: GM Clips and Fasteners [Re: daveSS1987]  
Joined: May 2006
Posts: 622
daveSS1987 Offline
Member
daveSS1987  Offline
Member

Joined: May 2006
Posts: 622
Enfield, CT
Just to confirm, I just got my package of bolts and clips yesterday from clipsandfasteners.com (the first link in this thread) and they seem to be great quality, I ordered 9 different items and 4 came in plastic polybags with detailed information printed on a slip of paper in each bag, while the other 5 items came in factory boxes from Auveco which was referenced in the other link as a manufacturer.
So I would give them a high recommendation for quality and having everything in stock.
Dave


1987 Choo Choo Customs El Camino SS with Monte Carlo SS TH200R4, 3.73 posi rear,'87 SS wheels, Edelbrock TES with Flowmasters, S-10 Xtreme spindles & front brakes and custom SS/GN interior w/ power seats, mirrors, antenna, concert sound, etc .... The way GM should have made it in 1987! Coming soon 383 w/ roller cam!
#901298 - 10/28/11 08:47 PM Re: GM Clips and Fasteners [Re: daveSS1987]  
Joined: Oct 2011
Posts: 15
Hou Tex MC SS Offline
Junior Member
Hou Tex MC SS  Offline
Junior Member

Joined: Oct 2011
Posts: 15
Sugar Land,Texas
I was just looking through and did not see them at first glance, but does anyone know if this site sells the clips for the door handles for our cars (i was on the first link..any site that has them will do)? I have one door that only works form the inside, and the other only works from the outside. I was told that the clips for the handles often fail. I havent torn into yet so I am not exactly sure what I am looking for so I was hoping one of you guys would know.

THX!


1984 Monte Carlo SS/350
1969 Chevelle SS/454
1967 Mustang GTA convertible/390 w/cam and 428 heads
1957 Chevy Sedan-under construction, tubbed and powder coated.
2000 Ford Excusion-(Wife's) with 8 inch lift and 22's w/37 inch tires.
One brain cell-on duty part time.
Page 1 of 2 1 2

Random Images
500/thumbs/photo_9_.JPG
by 83/84/86*2/87ss
500/thumbs/broke_the_wheeie_bars.jpg
by 555ss
500/thumbs/ss02.jpg
by fever53
730/thumbs/11.JPG
by vino2216
933/thumbs/On_the_Trailer5.JPG
by Sherdep
Help MonteCarloSS.com


Recent Contributors
OneOwner85
Authorized Vendors
Tell them you saw it
on MonteCarloSS.com!


CustomMonteSSParts.com
Dixie Monte Carlo Depot
GSI Interiors
HRpartsNstuff
Mikes Montes
Savitske Classic & Custom
Powered by UBB.threads™ PHP Forum Software 7.6.0