MonteCarloSS.com
MonteCarloSS.com
Previous Thread
Next Thread
Print Thread
#1058976 - 09/06/18 06:44 PM 1988 Monte Carlo SS Part Out  
Joined: Dec 1999
Posts: 12,083
PB86SS/87LS Offline
Administrator
15+ Year
PB86SS/87LS  Offline
Administrator
15+ Year

Member

Joined: Dec 1999
Posts: 12,083
New Berlin, WI
Bought this almost a year ago and after getting it running had visions of driving it more often, even in winter a bit. Never really panned out that way, I finally started taking it apart a week ago and have sold several parts and have others that are pending, but thought I'd post it anyway as there are still plenty of things available. Both rear rails and even front by the steering box have rot, body has enough rot all over that it isn't worth saving. Did run/drive.

[Linked Image]

[Linked Image]

[Linked Image]

What has been SOLD or that I'm keeping:
Seats
Door panels
Dash
Column
Fan shroud
1/4 Glass
Air cleaner
AC Box/controls
Front and rear window trim
Wiper motor
Bumper shocks (front)
Door top moldings
Rear spoiler
Side mirrors
Passenger fender
Dash wiring
Q-Jet

Sales pending:

Wheels
Driver fender
Doors (rust issues)
Cluster
Console/shifter
Tail lights
Rear bumper

So that leaves:

Steering wheel with cap (better shape than most I get) - SOLD
SS front end setup complete(cover, bumper, air dam/lid, headlight buckets, extensions, chin spoiler) - $250
3.73 open rear end - $150
200-4r (CZF etched on tag) - SOLD
350 87-95 block with TBI heads (from intake to pan, no accessories) - SOLD
Steering box - $60
Sway bar set - $60
Jounce bars - $20
Crossmember - $25
Newer aluminum radiator - $40
A-pillars (no dry rot, drivers side has a screw hole) - $20
B-pillars (nice) - SOLD
Dual maplight 87-88 option) - SOLD
Visors, nice shape, no mirror option - $25
3rd brake light with wiring/mount - $25
Rear sail panels - $40 complete tops/bottoms
Power window/lock setup, all wiring/motors intact, regulators, no switches - $100

Many other small items I can't think of at the moment, inquire.

Local pickup for the large items (drivetrain items, front clip, etc) and local sales get priority over shipping anything.

Last edited by PB86SS/87LS; 09/17/18 04:08 PM.

-86'SS 383 CCC QJet- BRF 2004r-8.5" 3.42 -313/344@RW - 13.35 @103
-87'LS 350 MAF/SD TPI- CRF 2004r-7.5" 3.42 -248/340@RW - 14.55 @ 96
-88'SS 350 CCC QJet - CZF 2004r-7.5" 3.73 Winter Beater/Future Parts Car?
-07'TBSS Stockish daily driver
[Linked Image]
#1058988 - 09/07/18 08:26 AM Re: 1988 Monte Carlo SS Part Out [Re: PB86SS/87LS]  
Joined: Jun 2014
Posts: 35
bagotrixz831 Offline
Member
bagotrixz831  Offline
Member

Joined: Jun 2014
Posts: 35
watsonville, CA
drive shaft for sale?

#1058990 - 09/07/18 01:23 PM Re: 1988 Monte Carlo SS Part Out [Re: PB86SS/87LS]  
Joined: Dec 1999
Posts: 12,083
PB86SS/87LS Offline
Administrator
15+ Year
PB86SS/87LS  Offline
Administrator
15+ Year

Member

Joined: Dec 1999
Posts: 12,083
New Berlin, WI
I do, not pulled yet (along with drivetrain) but it would be $20, plus shipping.


-86'SS 383 CCC QJet- BRF 2004r-8.5" 3.42 -313/344@RW - 13.35 @103
-87'LS 350 MAF/SD TPI- CRF 2004r-7.5" 3.42 -248/340@RW - 14.55 @ 96
-88'SS 350 CCC QJet - CZF 2004r-7.5" 3.73 Winter Beater/Future Parts Car?
-07'TBSS Stockish daily driver
[Linked Image]
#1058991 - 09/07/18 01:31 PM Re: 1988 Monte Carlo SS Part Out [Re: PB86SS/87LS]  
Joined: May 2007
Posts: 1,567
MattsMonte Offline
10+ Year
MattsMonte  Offline
10+ Year
Member

Joined: May 2007
Posts: 1,567
Johnston, Iowa
If it does not sell with the console, I might be interested in center console plastic shifter cover. What condition and what price?


[Linked Image]

1988 MCSS T-Tops. Frame off restoration, 330HP 350 crate engine, 700R4 transmission.
#1058992 - 09/07/18 02:18 PM Re: 1988 Monte Carlo SS Part Out [Re: MattsMonte]  
Joined: Dec 1999
Posts: 12,083
PB86SS/87LS Offline
Administrator
15+ Year
PB86SS/87LS  Offline
Administrator
15+ Year

Member

Joined: Dec 1999
Posts: 12,083
New Berlin, WI
Originally Posted by MattsMonte
If it does not sell with the console, I might be interested in center console plastic shifter cover. What condition and what price?


Usually I like to get $25 for them if fairly decent. I did re-stripe this one and clean it up a little awhile ago. They new reproduction ones are roughly $50 or so and made from the same tooling that GM used, just an FYI, if I was after one that is remade that way that's the direction I'd go. Just saw some in person at Mike's Monte's and they look just like GM's, IMO.


-86'SS 383 CCC QJet- BRF 2004r-8.5" 3.42 -313/344@RW - 13.35 @103
-87'LS 350 MAF/SD TPI- CRF 2004r-7.5" 3.42 -248/340@RW - 14.55 @ 96
-88'SS 350 CCC QJet - CZF 2004r-7.5" 3.73 Winter Beater/Future Parts Car?
-07'TBSS Stockish daily driver
[Linked Image]
#1059005 - 09/08/18 03:20 AM Re: 1988 Monte Carlo SS Part Out [Re: PB86SS/87LS]  
Joined: May 2007
Posts: 1,567
MattsMonte Offline
10+ Year
MattsMonte  Offline
10+ Year
Member

Joined: May 2007
Posts: 1,567
Johnston, Iowa
So is it available for sale? Can I see a close up pic, please? I will pm you an email address for the pics


[Linked Image]

1988 MCSS T-Tops. Frame off restoration, 330HP 350 crate engine, 700R4 transmission.
#1059007 - 09/08/18 12:11 PM Re: 1988 Monte Carlo SS Part Out [Re: MattsMonte]  
Joined: Dec 1999
Posts: 12,083
PB86SS/87LS Offline
Administrator
15+ Year
PB86SS/87LS  Offline
Administrator
15+ Year

Member

Joined: Dec 1999
Posts: 12,083
New Berlin, WI
Originally Posted by MattsMonte
So is it available for sale? Can I see a close up pic, please? I will pm you an email address for the pics


No, sorry, I should of clarified that, the shift plate is going with the console. Just stating what I would do if I was selling it on it’s own.

Last edited by PB86SS/87LS; 09/08/18 12:11 PM.

-86'SS 383 CCC QJet- BRF 2004r-8.5" 3.42 -313/344@RW - 13.35 @103
-87'LS 350 MAF/SD TPI- CRF 2004r-7.5" 3.42 -248/340@RW - 14.55 @ 96
-88'SS 350 CCC QJet - CZF 2004r-7.5" 3.73 Winter Beater/Future Parts Car?
-07'TBSS Stockish daily driver
[Linked Image]
#1059031 - 09/11/18 01:25 AM Re: 1988 Monte Carlo SS Part Out [Re: PB86SS/87LS]  
Joined: May 2007
Posts: 1,567
MattsMonte Offline
10+ Year
MattsMonte  Offline
10+ Year
Member

Joined: May 2007
Posts: 1,567
Johnston, Iowa
thanks.


[Linked Image]

1988 MCSS T-Tops. Frame off restoration, 330HP 350 crate engine, 700R4 transmission.
#1059032 - 09/11/18 02:22 AM Re: 1988 Monte Carlo SS Part Out [Re: PB86SS/87LS]  
Joined: Jan 2011
Posts: 217
jwc55 Offline
Member
jwc55  Offline
Member

Joined: Jan 2011
Posts: 217
Wiarton Ontario
Hey Paul....looking for an ashtray,,,,any condition


Jim
87 SS... White with T-tops
87 Aerocoupe... White with T-tops
#1059036 - 09/11/18 04:57 AM Re: 1988 Monte Carlo SS Part Out [Re: PB86SS/87LS]  
Joined: Dec 1999
Posts: 12,083
PB86SS/87LS Offline
Administrator
15+ Year
PB86SS/87LS  Offline
Administrator
15+ Year

Member

Joined: Dec 1999
Posts: 12,083
New Berlin, WI
I have one, just the tray? Might have a bracket too.


-86'SS 383 CCC QJet- BRF 2004r-8.5" 3.42 -313/344@RW - 13.35 @103
-87'LS 350 MAF/SD TPI- CRF 2004r-7.5" 3.42 -248/340@RW - 14.55 @ 96
-88'SS 350 CCC QJet - CZF 2004r-7.5" 3.73 Winter Beater/Future Parts Car?
-07'TBSS Stockish daily driver
[Linked Image]
#1059091 - 09/16/18 07:09 AM Re: 1988 Monte Carlo SS Part Out [Re: PB86SS/87LS]  
Joined: Aug 2018
Posts: 7
Kilo87 Offline
New Member
Kilo87  Offline
New Member

Joined: Aug 2018
Posts: 7
Henderson NV
How much for the trunk and wiring harness

Last edited by Kilo87; 09/16/18 07:16 AM.
#1059092 - 09/16/18 12:01 PM Re: 1988 Monte Carlo SS Part Out [Re: PB86SS/87LS]  
Joined: Dec 1999
Posts: 12,083
PB86SS/87LS Offline
Administrator
15+ Year
PB86SS/87LS  Offline
Administrator
15+ Year

Member

Joined: Dec 1999
Posts: 12,083
New Berlin, WI
Trunk lid was sold, which wiring harness?


-86'SS 383 CCC QJet- BRF 2004r-8.5" 3.42 -313/344@RW - 13.35 @103
-87'LS 350 MAF/SD TPI- CRF 2004r-7.5" 3.42 -248/340@RW - 14.55 @ 96
-88'SS 350 CCC QJet - CZF 2004r-7.5" 3.73 Winter Beater/Future Parts Car?
-07'TBSS Stockish daily driver
[Linked Image]
#1059094 - 09/16/18 07:00 PM Re: 1988 Monte Carlo SS Part Out [Re: PB86SS/87LS]  
Joined: Aug 2018
Posts: 7
Kilo87 Offline
New Member
Kilo87  Offline
New Member

Joined: Aug 2018
Posts: 7
Henderson NV
Under the hood engine bay wiring harness

#1059101 - 09/17/18 02:24 AM Re: 1988 Monte Carlo SS Part Out [Re: PB86SS/87LS]  
Joined: Dec 1999
Posts: 12,083
PB86SS/87LS Offline
Administrator
15+ Year
PB86SS/87LS  Offline
Administrator
15+ Year

Member

Joined: Dec 1999
Posts: 12,083
New Berlin, WI
I have the headlight harness, engine side harness and computer side/engine harness all available. Engine side has had some repairs but was off a running/driving car.


-86'SS 383 CCC QJet- BRF 2004r-8.5" 3.42 -313/344@RW - 13.35 @103
-87'LS 350 MAF/SD TPI- CRF 2004r-7.5" 3.42 -248/340@RW - 14.55 @ 96
-88'SS 350 CCC QJet - CZF 2004r-7.5" 3.73 Winter Beater/Future Parts Car?
-07'TBSS Stockish daily driver
[Linked Image]
#1059112 - 09/18/18 07:49 PM Re: 1988 Monte Carlo SS Part Out [Re: PB86SS/87LS]  
Joined: Aug 2018
Posts: 7
Kilo87 Offline
New Member
Kilo87  Offline
New Member

Joined: Aug 2018
Posts: 7
Henderson NV
Ok thanks

#1059115 - 09/18/18 09:34 PM Re: 1988 Monte Carlo SS Part Out [Re: PB86SS/87LS]  
Joined: Dec 1999
Posts: 12,083
PB86SS/87LS Offline
Administrator
15+ Year
PB86SS/87LS  Offline
Administrator
15+ Year

Member

Joined: Dec 1999
Posts: 12,083
New Berlin, WI
Let me know if interested in any or all, those are the three that go under hood.


-86'SS 383 CCC QJet- BRF 2004r-8.5" 3.42 -313/344@RW - 13.35 @103
-87'LS 350 MAF/SD TPI- CRF 2004r-7.5" 3.42 -248/340@RW - 14.55 @ 96
-88'SS 350 CCC QJet - CZF 2004r-7.5" 3.73 Winter Beater/Future Parts Car?
-07'TBSS Stockish daily driver
[Linked Image]

Random Images
500/thumbs/1381888_639731979381690_495570440_n.jpg
by JMonte7892
524/thumbs/Super_Chevy_Bristol_001.JPG
by NC87AERO
557/thumbs/JP86SS1-1600x1200.jpg
by Z65_Paul
510/thumbs/100_0308.JPG
by 85_SS
500/thumbs/Photo0161.jpg
by valvefloat ss
Help MonteCarloSS.com


Recent Contributors
Rob Forbes
techjay
Authorized Vendors
Tell them you saw it
on MonteCarloSS.com!


CustomMonteSSParts.com
Dixie Monte Carlo Depot
GSI Interiors
HRpartsNstuff
Mikes Montes
Savitske Classic & Custom
Powered by UBB.threads™ PHP Forum Software 7.6.0